41
English
Warning:
Always make sure that the discharge screw is defi nitely locked in the transport po-
sition. This prevents the screw from falling downwards by itself when the machine
is moving and thus eliminates the consequences arising from this happening.
Removing the discharge screw:
After the lock for the discharge channel has been released, position yourself underneath the
discharge channel so that it rests on your shoulder. Hold the screw on both sides and swing the
discharge travel through an angle of approximately 45°. Then lift the discharge channel until the
pivoting point of the screw is evenly removed from the hinge support.
Caution:
The complete discharge channel weighs 27 kg.
Do not underestimate this weight.
11.3.1.2 Special discharge screw for a conveying height of 2000 mm
Placing the discharge screw in the transport position:
• To reduce the length of the machine during transportation, you can move the discharge channel
upwards so that it lies completely on top of the machine. But fi rst allow the collector chamber
and the screw to continue to rotate until all chippings have disappeared.
• Always make sure that the machine is completely switched OFF before releasing the discharge
channel. Release the clamp that secures the discharge channel to be collector.
• Remove the clamp from the collector.
• The discharge channel is equipped with two handles. This requires two people : Grasp the
handles and swing the discharge channel upwards. After the discharge channel has passed the
vertical position, allow it to gently drop downwards until its entire weight is supported by the
machine.
• Make sure that the discharge channel is lowered gently onto the machine.
Removing the discharge screw:
• In order to remove the discharge screw from the machine, it must fi rst be swung forwards into
the transport position.
• Pull the long hinge pin out of the hinge for the discharge channel with the collector. Before do-
ing this, fi rst remove the split pin from the hinge pin.
• The discharge channel is now disconnected from the machine and, with the help of a second
person, you can now remove the shredder.
Caution:
The 2070 mm discharge channel weighs 50 kg. Be fully aware of this weight in
order to prevent injury when lifting.
Summary of Contents for MA 018 010 130
Page 1: ...Megaprof M A N U A L...
Page 7: ...7 English...
