46
English
11.3.7 Access to the battery and the components for the wheel drive
In order to top up or disconnect the battery, or in order to gain easy access to all hydraulic com-
ponents for the wheel drive or split differential, you must remove the safety cover at the rear of
the machine.
• Swing the collector upwards, as described in 11.3.4.
• The orange safety cover is secured by 6 M6 bolts (see illustration 1-6).
• Remove these bolts (10 mm spanner) and remove the cover.
TIP: To disconnect the battery : fi rst disconnect the negative pole (black wire) and then discon-
nect the positive pole (red wire) (13 mm spanner).
11.3.8 Swinging open the feed hopper
The entire hopper can be lifted and tipped to one side via a central hinge in order to gain easy
access to the engine and everything that is located underneath the hopper.
Warning:
Before tipping the feed hopper to one side, fi rst switch OFF the engine and
remove the key from the ignition lock.
• Remove both safety covers at the side (see 11.3.2.1).
• Swing the handlebar downwards to the operating position (see 9.6)
• Remove the only bolt (10 mm spanner) that secures the hopper to the chassis. This is the M6
bolt that secures the control lever for the feed mechanism to the connecting rod that is routed to
the hydraulic distribution valve.
Summary of Contents for MA 018 010 130
Page 1: ...Megaprof M A N U A L...
Page 7: ...7 English...
