47
English
• Use compressed air to remove all traces of penetrating oil from the bearing and from the bear
-
ing joints.
• Apply new lubricating oil. ELIET recommends Novatio ClearLube as a lubricant.
• Wipe away any excess lubricant.
D. Lubricating the chains and the gearwheels
This group includes the following locations on the machine:
Chain drive of the feed roller.
Use the following procedure :
• Remove the guards to expose the drive (see Chapter 11.2.2).
• Wipe away all grease in and around the drive.
• Use penetrating oil containing molybdenum disulphide to dissolve the lubricant.
• When the drive is clean and all traces of grease and dirt have been removed, you can apply new
lubricant.
• Use a small brush to apply the lubricant to the teeth of the gearwheels. Use Sunoco Multi Pur
-
pose Grease or a product of the same quality.
• It is better to use a thin liquid lubricant that can penetrate into the chains. For this, ELIET
recommends Clear Lube lubricant spray from Novatio.
• After applying the lubricant, the guards are carefully refitted in order to keep out dust and dirt
as much as possible.
All these greases are available from your ELIET Dealer.
Summary of Contents for MA 006 010 113
Page 1: ...Superprof M A N U A L...
Page 2: ...2 English...
