36
English
• Clean the cartridge by tapping it gently against a flat surface.
• Refit the cartridge (with the UP mark showing upwards) and screw down.
• Refit the pre-cleaner to the cartridge.
• Refit the cover and secure the cover using the hold-down clamps.
11.3.5 Changing the air filter
These actions are almost identical to cleaning the air cleaner (see Chapter 11.3.4). The only differ-
ence here is that the cartridge is replaced.
New air cleaners of the correct type are available from your ELIET Dealer or from an authorized
Briggs & Stratton service centre. (B&S order number 394018S)
11.3.6 Changing the engine fuel filter
• Switch off the engine and remove the ignition key from the ignition switch.
Warning :
Always allow the machine to cool down this is to avoid fire hazard or danger of
explosion.
• Loosen the retaining straps (2) and (3) (using a universal wrench).
• Remove the filter from between the straps.
• Insert the new filter (whilst taking note of the direction of
the arrow marked on the filter). New filters are available from
your local Eliet dealer or from a B&S service center. (B&S order
Number 496629)
• Retighten the straps.
• Clean up any spilt fuel.
• Start the engine and inspect for signs of leakage.
11.3.7 Adding additional battery acid
Warning :
Battery acid is corrosive and therefore dangerous. Wear safety glasses and
protective garment and work in a well-ventilated area.
• Switch off the engine and remove the ignition key from the ignition switch.
Summary of Contents for MA 006 010 113
Page 1: ...Superprof M A N U A L...
Page 2: ...2 English...
