Eliet KS300 PRO, Manual

Page: 27 / 48

English
www.eliet.eu ).
Cleaning the machine entails more than just cleaning the outside. Open all protective covers so
that you can also clean the inside of your machine.
• Use penetrating oil with MoS2 to remove grease and lubricants. The latter is a lubricant and
rust solvent at the same time.
Using a dry cloth, remove any dirt form the frame. Particularly where safety stickers have been
placed. (Do not use a cleaning agent that will remove paint or stickers)
If safety messages on stickers have become illegible, please replace. Original stickers can be pur-
chased from your ELIET dealer.
Compressed air can be used to easily blow out and clean some parts.
Pay particular attention to cleaning the engine. Cooling fins and air inlets are of key importance
to guarantee adequate cooling of the engine. 
A steamer may be used for cleaning, Do not spray excessive amounts of water on the bear-
ings, electric contacts and filler caps. Water is the number one cause of rust and this must be
avoided at all times. Allow the engine to cool down properly before treating it with water.
Caution:
Cleaning activities to the machine must always be carried out with the engine
turned off. Wear suitable clothing for cleaning activities. Utility gloves are es-
sential.