Commissioning
Commissioning of the hardware
The mounting and electrical installation can differ according to the design and variant of the displays.
You will find the corresponding instructions in the product data sheets of the flexyPage displays.
Required wiring
Warning!
The wiring of the displays may only be carried out by specialists!
Incorrect wiring can lead to injury, fire or damage to the components.
For the operation of the displays, the following wiring must be carried out before switching on for the
first time:
●
24 VDC power supply (For devices of the type fel1C and fel2B 12 VDC)
●
CAN bus (note termination!)
○
to the CAN bus of a lift system with a CANopen-Lift
○
or to external I/O m sensors for providing the signals
●
RS485 interface for connection to systems with proprietary protocol
●
with parallel wiring inputs/outputs and calls
●
HDMI (only boxed versions)
●
external speakers or active speakers
●
LAN network
○
for connection to the internet or an intranet
○
for the configuration of the display
●
WLAN USB adapter (fel2, fel4 and fel5)
○
Optional for activation of the access point
○
For display configuration
Note LAN:
Previously, it was necessary to use a crossover LAN cable for a point-to-point connection between two
computers. For some time, the network interfaces of the devices are independently able to assign the
© ELFIN Technology GmbH | flexyPage displays user manual | version 2.1.x | 2022-06
12
