●
You have an existing local IPv4 network with multiple PC’s over which the access to the display
is supposed to take place.
●
You have an existing local IPv4 network over which the internet connection is supposed to be
provided.
●
You have an existing network in which the IP addresses for the participants are supposed to or
necessary to be given dynamically.
●
You want to connect several flexyPage displays together.
To change the network settings of the display, log into the display (see chapter
Connection to the
internet via web browser
). In order to change the network settings, you need the rights of the user role
Setup
. You can find the network parameters of the LAN interface under:
Hardware settings > network > LAN > network device.
In the upper area of the dialogue, the current status of the network adapter is displayed.
Here you will find the MAC address and you can check whether the adapter is connected. Below, the
settings of the active adapters are displayed. With a click on this overview, a dialogue in which the
parameters can be adjusted, opens (see figure below).
Figure: Device network information
Enter the appropriate settings for your network here. If you have any questions about these parameters,
please contact your network administrator.
If you want to connect directly to your computer with the display, you must adjust the network settings
of your computer.
Information on this can be found in our video tutorials
© ELFIN Technology GmbH | flexyPage displays user manual | version 2.1.x | 2022-06
37
