Page 15
Motion Detector Advanced User Manual
Compatible Command Classes
The Motion Detector supports the following command classes:
x COMMAND_CLASS_ZWAVEPLUS_INFO (V2)
x OMMAND_CLASS_MANUFACTURER_SPECIFIC (V2)
x COMMAND_CLASS_VERSION (V2)
x COMMAND_CLASS_ASSOCIATION (V2)
x COMMAND_CLASS_ASSOCIATION_GRP_INFO (V1)
x COMMAND_CLASS_DEVICE_RESET_LOCALLY (V1)
x COMMAND_CLASS_POWERLEVEL (V1)
COMMAND_CLASS_SWITCH_BINARY (V1)
COMMAND_CLASS_NOTIFICATION (V4)
COMMAND_CLASS_METER (V4)
COMMAND_CLASS_CONFIGURATION (V1)
COMMAND_CLASS_SWITCH_ALL (V1)
COMMAND_CLASS_BASIC (V1)
Command Class
Notes
Binary Sensor (30)
The Motion Detector also sends a Binary Sensor Report when motion
is detected or cleared. See below for the Binary Sensor Report
parameters sent:
Sensor Type
: 0C
(Motion)
Motion Detected
: FF
No More Motion
: 00
Wake Up V2 (84)
The wake-up interval is set in seconds, and is 43,200 seconds (12 hours)
by default. The wake-up interval can be set to any value from 300s (5
minutes) to 16,777,200s (about 190 days) in 60-second increments.
Configuration V1 (70)
See ““Configuration” Command Class Parameters” on page 16.
Table 6 - Command Classes Continued
