Page 10
Motion Detector Advanced User Manual
Physical Installation
Installation—With Double-Stick Tape
1. Find a good location (Fig 4) with adequate Z-Wave coverage to mount your
Motion Sensor.
2. Wipe your wall clean of any dirt and grease.
3. Peel-and-stick the MOUNT to your wall using the included double-stick
tape.
4. Place the SENSOR on the MOUNT (MAGNET) at an angle to properly mon-
itor your room, and the magnet will hold the SENSOR in place.
Installation—With Screws
1. Find a good location (Fig 4) with adequate Z-Wave coverage to mount your
Motion Detector.
2. Twist the MOUNT counterclockwise to separate the MOUNT (MAGNET)
from the MOUNT (WALL MOUNT).
3. Hold the MOUNT (WALL MOUNT) to your wall and drive the included screws
through the SCREW HOLES.
4. Reattach the MOUNT (MAGNET) to the MOUNT (WALL MOUNT).
5. Place the SENSOR on the MOUNT (MAGNET) at an angle to properly mon-
itor your room, and the magnet will hold the SENSOR in place.
