Page 9
Motion Detector Advanced User Manual
Physical Installation
How to Use—Tabletop
You can use the facets on the Sensor Body to properly angle the Motion Sensor
on a table top or bookshelf to monitor a room.
1. Remove the Magnetic Cradle and store it for later use if needed.
2. Make sure your device is powered on and that there is enough Z-Wave
coverage in your installation location.
3. Follow Figure 3 and place the Sensor Body on a flat horizontal surface
with an unobstructed view of the area you wish to monitor.
How to Use—Wall Mount
You can mount the Motion Detector on any wall with a central line-of-sight per-
spective of the area you wish to monitor. See Figure 4 to visualize the Motion
Sensor’s coverage area and its optimal positioning. It is best to mount the
Motion Detector as high as possible to avoid limiting its effective range with
obstacles like tables and chairs.
110.00°
SolidWorks Student Edition.
For Academic Use Only.
Figure 3 - Using the Motion Detector on a tabletop
SolidWorks Student Edition.
For Academic Use Only.
Figure 4 -
Motion Detector Wall Mount Configurations
Physical Installation
