Page 19
Motion Detector Advanced User Manual
Troubleshooting
:
Q Help! My Motion Detector paired successfully, but my controller
can’t see it anymore after I installed it!
:
A The Z-Wave signal is probably weak in that area of your home. Remember that the
120' - 150' range doesn’t take into account walls, furniture, and other obstacles.
To boost your Z-Wave network coverage, add a few non-battery powered Z-Wave
devices between the controller and the furthest device, like the Dome On/Off Plug
or Water Main Shut-Off. You can even purchase dedicated Z-Wave extenders from
3rd party manufacturers.
:
Q There’s so many words in this manual I don’t understand. How can
I learn more about Z-Wave?
:
A Remember you don’t have to understand everything in this manual to start
automating your home. Our Quick-Start Guides have all you need to start using
any device. For more thorough information about Z-Wave home automation, visit
www.domeha.com/support.
:
Q My Motion Detector keeps sending signals when there is no move-
ment/it doesn’t respond everytime it should.
:
A You most likely have to fine tune the sensitivity levels - contact your controller’s
manufacturer for further assistance. If you are still having issues, please visit
www.domeha.com/support
:
Q I’ve tried multiple times, but I can’t include the Motion Detector in
my system.
:
A Make sure your device is getting power. Then, follow the procedure to Factory
Reset on Page 8 and try going through the inclusion process again. If you are still
having issues, please visit www.domeha.com/support
:
Q All of a sudden, my Motion Detector is offline.
:
A Make sure your device is getting power. If powered, make sure you still have
Z-Wave network coverage. If you are still having issues, visit www.domeha.com/
support.
Troubleshooting
