The tool was designed so as to be electrically safe and to work
with specific power supply voltage levels.
Failure to comply with the specifications related to the power
supply may impair the tool efficiency.
Safety Measures:
•
Do not wet with water or other liquids.
•
If not otherwise specified, use the tool on vehicles with a 12/24V DC power
supply and the chassis connected to the negative pole.
•
The connection for the power supply of the tool should always occur with the
battery system of the concerned vehicle.
•
Do not use external batteries to supply the tool unless it is explicitly required
by the software.
•
Pay particular attention to battery terminals and cables when setting up a
connection to the vehicle. This will avoid false contacts and/or avoid
accidentally connecting the cables to metallic parts of the vehicle being
tested.
•
Unused terminals must be covered and protected by the appropriate rubber
plugs.
The electromagnetic compatibility tests carried out on the unit
guarantee that it can be adapted to the technologies normally used
on vehicles (e.g.: engine check, ABS, airbag etc.). Nevertheless,
if malfunctions occur you should contact the vehicle dealer.
16
Summary of Contents for TwinProbe
Page 1: ...TwinProbe User Manual www elektropartner com...
Page 2: ...ENGLISH 5 en...
Page 3: ...2...
