10.1.3 Power supply through internal battery
The internal lithium battery at 3,7 V, 1 A/h can operate the tool for about 1
hour and 45 minutes if you use the OSCILLOSCOPE module with 2 active
channels and USB 2.0 port connected.
The battery also works as a
back-up battery
. If the power supply lowers
during the start-up phase, the battery is not influenced by decreases in
voltage.
Make sure that the proper power supply is always supplied to
the tool.
The state of charge of the internal battery is indicated on screen from the
software through a specific icon:
.
For more information consult the software operating manual.
10.1.4 Recharging the Internal Battery
The tool charges the internal battery automatically every time the power
supply voltage goes above 8 V. This happens independently from the
power supply mode selected.
The charge in progress is indicated by the
RED LED
that stays on.
27
en
Summary of Contents for TwinProbe
Page 1: ...TwinProbe User Manual www elektropartner com...
Page 2: ...ENGLISH 5 en...
Page 3: ...2...
