Safety Measures:
•
Do not allow unqualified personnel using the tool, in order to avoid accidents
to people or damages to the tool or to electronic systems of the vehicle to
which it is connected.
•
Follow the instructions supplied by the software closely and carefully.
4.4 Tool Safety
The tool was designed for the use in specific environmental
conditions.
The use of the tool in environments with temperature and moisture
characteristics different from those specified may impair its
efficiency.
Safety Measures:
•
Place the tool in a dry place.
•
Do not expose or use the tool near heat sources.
•
Position the tool making sure it can be properly ventilated.
•
Do not use corrosive chemicals, solvents or harsh detergents to clean the
tool.
The tool was designed so as to be mechanically tough and suitable
for use in a workshop.
Careless use and excessive mechanical stress may impair its
efficiency.
Safety Measures:
•
Do not drop, shake or subject the tool to shocks.
•
Do not place the tool where it could fall into water. Avoid any contact with
water.
•
Do not lean heavy or sharp objects on the cables.
•
Always avoid twisting or pulling the cables repeatedly.
•
Do not perform any kind of intervention that may damage the tool.
•
Do not open or dismantle the tool.
15
en
Summary of Contents for TwinProbe
Page 1: ...TwinProbe User Manual www elektropartner com...
Page 2: ...ENGLISH 5 en...
Page 3: ...2...
