ELEKTRA VCD10, Installation Manual

Page: 7 / 72

Note:
Heating cables must be installed according with
the Instructions.
Mains connection of the heating cables should
be performed by an authorized electrician.
Heating cables should be always positioned
in the safe distance from other heat sources
(e.g. hot water pipes), the min. distance is 25 mm.
!
Type of
the
heating
system
Floor
type
Recom-
mended
heating
cables
Output per m
2
of the floor
Warm
floor
Ceramic,
stone
and PVC
floorings
VCD10
VCD17
85 W/m²
Other
floorings
VCD10 65 W/m²
Primary
heating
systems
Ceramic,
stone
and PVC
floorings
VCD7
VCD10
VCD17
Requires
designing the
heating system
and its controls
by a designer,
dealer or
authorized
installer.
Other
floorings
VCD7
VCD10
General information
Note:
The presence of the heating cable shall be made
evident by the posting of caution signs or mark -
ings, such as in the fuse box, at appropriate loca-
tions, such as at the power connection fittings
and/or at frequent intervals along the circuit and
be part of any electrical documentation follow-
ing the installation.
!
7