Keithley Instruments, Inc.
28775 Aurora Road
Cleveland, Ohio 44139
1-888-KEITHLEY
www.keithley.com
PA-1001 Rev. D / September 2011
1
Model 4210-MMPC-C
Multi-Measurement Prober Cable Kit
Quick Start Guide
Overview
The Keithley Instruments Model 4210-MMPC-C multi-measurement cable kit (see Figure 1) is a collection of
standard and custom connectors and accessories used to take I-V and C-V measurements using a single prober
cable setup. It is also used with the Keithley Model 4225-PMU or 4200-PIV-A package to perform pulse I-V
measurements. This kit has been assembled for use with the Cascade Microtech 12000 prober series (manipulator
type DCM-200 series).
For C-V testing, this Quick Start Guide applies to both the Model 4200-CVU card and
the new 1 kHz Model 4210-CVU card. For pulse I-V testing, this guide also applies to
the Models 4200-PG2, 4205-PG2, 4220-PGU, and 4225-PMU pulse cards.
Prober cable kit contents
Figure 1 shows the cables, adapters, and supplies that are included in the Model 4210-MMPC-C
multi-measurement cable kit. Also, note that there is an 8” x 10” bag and two screws in this kit (not shown):
4-40x3/16CUPSTBK.
Figure 1: Model 4210-MMPC-C multi-measurement prober cable kit
