Keithley Instruments, Inc.
28775 Aurora Road
Cleveland, Ohio 44139
1-888-KEITHLEY
www.keithley.com
12
PA-1001 Rev. D / September 2011
Model 4210-MMPC-C
Multi-Measurement Prober Cable Kit
Quick Start Guide
Setup using the Keithley Model 4225-PMU for pulse I-V measurements
NOTE
The setup for four-pin pulse I-V testing requires four prober cable kits.
The Model 4225-PMU is an Ultra Fast I-V Module that is an instrument card for the Model 4200-SCS. The PMU has
two channels of voltage pulse source with integrated simultaneous voltage and current measurement.
Figure 15 shows the cable and adapters needed to connect a PMU channel to the prober bulkhead and Figure 16
shows a typical prober connection setup for testing a four-pin device. .
Figure 15: Cable and adapters used to connect PMU channel to prober bulkhead
.
Figure 16: Basic four-pin prober setup for PMU