EL750
44 |
P a g e
8.1.4
Line Hole
This function is used to calculate the locations of Holes in a linear pattern. It is also known
as Linear Bolt Hole. The following Parameters are required:
Co-ord. 1 of center.
Co-ord. 2 of center.
Pitch Distance.
Angle.
No. of Holes. ( 0 - 99)
Depth.
Sel. Plane (X-Y, X-Z or Y-Z).
Above parameters are explained in below image.
When you have entered the above parameters then press {
} key for executing
function.
This opens a counting mode for showing the arrangement of the holes.
You can use [
] and [
] keys to move around the holes You can edit the saved
parameter by entering in edit menu by pressing {
} key. We can jump to particular
number of hole by pressing {
} key. Press {
} key to exit this function.
