EL750
55 |
P a g e
Press {
} key to apply the parameters of this tool and save the tool
settings against the tool name.
8.2 Lathe Machine Specific Functions:-
The following functions are available on {
} when you select Lathe Machine:
Summing [Available for 3 axis DRO Only]
Vectoring [Available for 3 axis DRO Only]
Taper
Zero Approach(Refer section 8.1.12 From Mill Functions)
Shrinkage Factor (Refer section 8.1.14 From Mill Functions)
Below function is available on Tool offset function, Press {
} key and {
}
key .
Tools
8.2.1
Summing
Axes Summing function is used to display combined movement of either X – Z
’
axes pair or
Z – Z
’
axes pair. The summing axis pair can be displayed either on X axis or Z axis.
Summing pair axis configuration setting is available in {
} menu.
To access Lathe functions go to {
} scroll to “summing” press {
} key.
This will show selection of axis
{
} You can select this option for the X-axis.
{
} You can select this option for the Z-axis.
{
} Exits to the main screen without saving the changes.
When you set a particular axis to sum mode, its axis legend changes to 'S' and the
summing pair is shown below the axis legend.
