EL750
41 |
P a g e
This opens counting mode for showing the arrangement of the holes.
You can use [
] and [
] keys to move around the holes. You can edit the saved
parameter by entering in edit menu by pressing {
} key. We can jump to particular
number of hole by pressing {
} key. Press {
} key to exit this function.
8.1.2
Arc Bolt Hole Function
Arc Bolt Hole function is very similar to Circular Bolt Hole function, except in arc hole
function user can enter the starting and ending angle of an arc. This angle is always with
respect to positive X-axis and is calculated in anti-clockwise direction. The following
Parameters are required:
Co-ord. 1 of center.
Co-ord. 2 of center.
Arc radius
Starting Angle
End Angle
No. of Holes( 0 - 99)
Depth
Select Plane (X-Y, Y-Z, X-Z)
Above parameters are explained in below image.
When you have entered the above parameters then press {
} key for executing
function.
