EL750
53 |
P a g e
8.1.14 Shrinkage Factor
This function is useful when manufacturing moulds/ Dies. While designing/manufacturing
the moulds the material shrinkage has to be considered. EL750 has a facility to enter this
shrinkage factor. Once this function is enabled the axis readings are multiplied by this factor
to compensate the material Shrinkage.
Follow the steps to apply shrinkage factor.
Navigate to Shrinkage Factor in Mill functions
Select {
} to enter shrinkage factor value using keypad.
Select {
,
} to apply the shrinkage factor.
Press [
] to save the changes.
