Electrolux EILFU17GS, Technical & Service Manual

Page: 47 / 96

5-7
C Co om mp po on ne en ntt T Te ea arrd do ow wn n
Figure 5-14. Light Shield Removal
Figure 5-15. Light Fixture Removal
W Wiirre e B Ba as sk ke ett R Re em mo ov va all
The wire baskets are secured with retaining clips
to the slide assemblies. (See Figure 5-13)
To remove the wire baskets:
1. Pull wire basket out from unit interior until the
slides are fully extended.
2. Pull wire basket out from the retaining clips on
each corner of the wire basket.
W Wiirre e B Ba as sk ke ett S Slliid de e R Re em mo ov va all
The wire basket slides are secured with screws to
the liner sidewalls. (See Figure 5-13)
To remove the wire basket slides:
1. Remove wire basket from slide assembly.
2. Using a phillips head screwdriver, extract the
two screws securing the slides to the liner side
wall.
L Liig gh htt S Sh hiie elld d R Re em mo ov va all
The light shield is secured with screws to the
interior cabinet ceiling. The light fixture and bulb
can be accessed without removing the light shield.
(See Figure 5-14)
To remove the light shield, use a phillips head
screwdriver and extract the three screws securing
the light shield to the interior cabinet ceiling.
L Liig gh htt F Fiix xttu urre e R Re em mo ov va all
The light fixture is secured with retaining latches
into the interior cabinet ceiling behind the light
shield. (See Figure 5-15)
To remove the light fixture:
1. Remove light bulb by turning counter
clockwise.
2. Pull down on the front of the light fixture while
turning the fixture a quarter turn to release the
retaining latches.
3. Disconnect wire leads from light fixture
terminals.
Figure 5-13. Wire Basket and Slide Removal
Wire Basket
Screws
Slide
Assembly
Light Shield
Screws
Light Bulb
Light Fixture