15
ENGLISH
c.
Open the cover lid of the water tank.
d.
Partially fill the water tank with clean
water and add a little mild detergent.
Swish it around, then empty and
rinse the water tank.
e.
Reinstall the cover lid, handle and
put the water tank back into the unit.
NOTE:
• Do not use a dishwasher to clean the
water tank. After cleaning, the water
tank must be put back in place so the
appliance will operate properly.
3.
Clean the Air Quality Sensor
Dust accumulated in the air quality
sensor may result in incorrect sensor
readings and affect performance. Use a
vacuum cleaner with a soft brush to
remove dust that might accumulate in
this area. Vacuum at least once every 4
weeks or as per instructions in the
Electrolux Life App.
6.
CARE, CLEANING AND STORAGE
6.1
To Clean the appliance
WARNING!
Before cleaning the unit, make sure to
disconnect the unit from power
supply.
1.
Clean the Filter lid and Case
• The plastic surface of the appliance
may be cleaned with an oil-free dry
cloth or a vacuum cleaner equipped
with a soft brush.
• Use the slightly damp cloth. Do not
use bleach or abrasives.
• Do not splash water directly onto the
unit. Doing so may cause electric
shock, insulation failure, or rusting.
• The air intake grille and outlet get
soiled easily, so cleaning such parts
with a vacuum cleaner is
recommended.
2.
Clean the Water Tank
Every 4-6 weeks, clean the water tank
to prevent growth of mold, mildew and
bacteria.
a.
Pull out the water tank from the unit.
b.
Take off the handle following the
steps as shown in below image.
1
2
3