12 www.electrolux.com
2.
Take out the HEPA particle filter.
3.
Replace the new filter into the unit (blue
side outwards) and close the filter lid.
4.
Reset the filter change indicator, press
and hold the " " and " " buttons for
5 seconds to reset the indicator.
5.13
Wireless Feature
For selected models only:
the appliance
is equipped with a WiFi module, which
enables remote control and access to the
full functionality of the system via our
smartphone app. Download our Electrolux
Life App and follow the instructions for
how to connect it with your appliance.
When the connection is established, the
"
" indicator will light up.
Please refer to the 'Quick Start Guide' or
the instructions in the App for details on
how to Connect to the home WiFi.
5.14
Alerts & Errors
When the appliance occurred with a
problem, the " " indicator shows on the
control panel and the display shows the
corresponding error code at the same
time.
E3-
PM2.5 sensor failure
E4-
DC Motor failure
E5-
Humidity sensor failure
E6-
Communication Failure
E7-
Indoor defrost thermistor failure.
E8-
Refrigerant Leakage
NOTE:
• For error code E3, appliance will continue
to run (some features may be disabled),
but for the other error codes, it will stop
operation completely.
• When error code occurred, unplug the
unit and plug it back in. If error repeats,
please contact Authorised Service
Centre.