11
ENGLISH
• Before entering TIMER setting, make
sure you have chose your desired
FUNCTION and MODE setting OR
humidity.
5.8
Ionizer Indicator
Long press " " and "
" buttons
simultaneously for 5 seconds to activate/
inactivate the Ionizer feature. When the
Ionizer feature is activated, the " "
indicator will show on the control panel
and the Ionizer is energized to help to
clean the air. This function is
recommended when the indoor air quality
is in bad condition.
5.9
Child Lock Indicator
Long press " " and "
" buttons
simultaneously for 5 seconds to activate/
inactivate the Child Lock feature. When the
Child Lock feature is activated, the " "
indicator will show on the control panel
and the control panel is locked.
5.10
Water Tank Full Indicator
When the water tank is full, the indicator
" " lights up and the buzzer beeps 15
times to remind you to empty the water
tank. The compressor will stop
immediately and the fan will still keep
running. See section "
5.15
Use the Water
Tank" to know how to handle and empty
the water tank.
AQI INDICATOR
COLOR
Blue
Green
Orange
Red
PM 2.5
(μg/m
3
)
AIR QUALITY
LEVEL
0-15
Very Good
16-35
Good
36-75
Bad
>75
Very Bad
5.11
Air Quality Index (AQI)
Indicator
The appliance has an air quality sensor
that analyses the air quality index.
The AQI (air quality index) light will show
the real-time air quality through different
colours of light as shown below:
5.12
Filter Change Indicator
The filter change icon " " will light up to
remind you to replace the HEPA particle
filter. Refer to the Electrolux Life App or the
Electrolux website on where to purchase
replacement filters. Always ensure the
plastic protective packaging is removed
from the filter before its use in the unit.
NOTE:
The HEPA particle filter cannot be washed,
it can only be replaced.
Follow below steps on how to replace your
HEPA particle filter:
1.
Open the filter lid with the finger pull
from the top.
