Symbol
Function
Weight Automatic
The display shows that the automat‐
ic weight system is on or that weight
can be changed.
Heat + Hold
The function is on.
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the oven.
Refer to "Care and cleaning"
chapter.
Clean the oven and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
5.2 First Connection
When you connect the oven to the mains
or after the power cut, you have to set
the language, the display contrast, the
display brightness and the time of the
day.
1. Press
or
to set the value.
2. Press
to confirm.
5.3 Setting the hardness level
for the water
When you connect the appliance to the
mains, you have to set the water
hardness level.
The table below explains the water
hardness range with the corresponding
Calcium deposit (mmol/l) and the quality
of the water.
Water hardness
Calcium deposit
(mmol/l)
Calcium deposit
(mg/l)
Water clas‐
sification
Class
dH
1
0 - 7
0 - 1.3
0 - 50
Soft
2
7 - 14
1.3 - 2.5
50 - 100
Moderately
hard
3
14 - 21
2.5 - 3.8
100 - 150
Hard
4
over 21
over 3.8
over 150
Very hard
When the water hardness exceeds the
values in the table, fill the water drawer
with bottled water. To check the
hardness level of the water you can use
water strips or contact your water
supplier.
You can change the hardness level of
the water in the menu: Basic Settings /
Water hardness.
www.electrolux.com
10
