Problem
Possible cause
Remedy
Steam and condensation
settle on the food and in
the cavity of the oven.
You left the dish in the
oven for too long.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
The demo mode is activa‐
ted.
Refer to "Basic Settings" in
"Daily use" chapter.
The descaling procedure is
interrupted before it finish‐
es.
There was a power cut.
Repeat the procedure.
The descaling procedure is
interrupted before it finish‐
es.
The function was stopped
by the user.
Repeat the procedure.
There is no water inside
the grill- / roasting pan af‐
ter the descaling proce‐
dure.
You did not fill the water
drawer to the maximum
level.
Check if the a descaling
agent / water is present in
the water drawer body.
Repeat the procedure.
There is dirty water on the
bottom of the cavity after
the descaling cycle.
The grill- / roasting pan is
on a wrong shelf position.
Remove the residual water
and the descaling agent
from the bottom of the
oven. Put the grill- / roast‐
ing pan on the first shelf
position.
The cleaning function is in‐
terrupted before it finishes.
There was a power cut.
Repeat the procedure.
The cleaning function is in‐
terrupted before it finishes.
The function was stopped
by the user.
Repeat the procedure.
There is no good perform‐
ance of the cleaning proce‐
dure.
You did not remove the
side grids before the start
of the cleaning procedure.
They can transfer heat to
the walls and decrease the
performance.
Remove the side grids
from the appliance and re‐
peat the function.
There is no good perform‐
ance of the cleaning proce‐
dure.
You did not remove the ac‐
cessories from the appli‐
ance before the start of the
cleaning procedure. They
can compromise the steam
cycle and decrease the
performance.
Remove the accessories
from the appliance and re‐
peat the function.
www.electrolux.com
44