Electrolux EB4GL70, User Manual, Page: 42 / 108

2. Set a heating function or setting.
3.
Press again and again until the
display shows Function Lock func-
tion.
4. Press OK to confirm.
Deactivating the Function Lock
function:
1.
Press two times.
2. Press OK to confirm.
10.4 SET + GO
The SET + GO function lets you set a
heating function (or programme) and use
it later with one press of the sensor field.
Activating the function:
1. Activate the appliance.
2.
Set the heating function.
3.
Press again and again until the
display shows Duration .
4. Set the time.
5.
Press again and again until the
display shows SET + GO .
6.
Press OK to confirm.
To start SET + GO function, press any
sensor field (except for
). The set heat-
ing function starts.
When the heating function ends, an
acoustic signal sounds.
• When the heating function operates,
the Function Lock function is on.
• You can activate and deactivate the
SET + GO function in the Basic Set-
tings menu.
10.5 Automatic switch-off
For safety reasons the appliance deacti-
vates after some time:
• If a heating function operates.
• If you do not change the steamer tem-
perature.
Steamer temperature Switch-off time
50 °C - 96 °C 12.5 h
The automatic switch-off works
with all functions, except Light ,
Duration , End Time .
10.6 Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you de-
activate the appliance, the cooling fan can
continue to operate until the appliance
cools down.
11. CARE AND CLEANING
WARNING!
Refer to the Safety chapters.
Notes on cleaning:
• Clean the front of the appliance with a
soft cloth with warm water and a clean-
ing agent.
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the oven interior after each use.
Then you can remove dirt more easily
and it does not burn on.
• Clean all oven accessories after each
use and let them dry.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can cause a damage to the
nonstick coating.
11.1 Steam Cleaning
1. Remove the worst of the dirt manual-
ly.
2. Put 250 ml of water with 3 table-
spoons of vinegar directly into the
steam generator.
14 www.electrolux.com