Electrolux BEVERAGE CENTER II, Service Manual

Page: 17 / 77

1 6
HELPFUL HINTS
BEVERAGE COOLER EXTRA
FEATURES TURESURES
OPTIONAL CASTER KIT
If you’d like to make your beverage center so it can be rolled
from room to room, there is an optional caster kit available
from your authorized Frigidaire dealer or service center. Just
ask for part number
5304451343 - Caster, Rail and Hardware
Kit, which includes 2 fixed casters, 2 swivel casters, 2 caster
support rails and mounting hardware.
ADJUSTABLE INTERIOR SHELVES
Adjustable interior shelve (P/N 241667701) can be used when
¼ keg is installed.
CAUTION CAUTION CAUTION CAUTION CAUTION
DO NOT ATTEMPT TO MOVE OR RELOCATE THIS
BEVERAGE CENTER WITH A KEG INSIDE.
PARTS OF A CO
2
REGULATOR
(A) Low Pressure Gauge
(B) Regulator Adjustment Screw
(C) Adjustment Lock Nut
(D) Shut-off Valve
(E) CO
2
Nut (used to connect to CO
2
Canister)
(F) High Pressure Gauge
BEER STORAGE TEMPERATURE
• Draft beer is not pasteurized, so it must be kept cold,
preferably at 38ºF. Temperatures above 38ºF may cause
the beer to become wild, turn sour and cloudy.
RECOMMENDED KEG HANDLING
• Be sure the keg is cold when you purchase it.
• Transfer keg from place of purchase and install in
beverage center in 2 hours or less.
• After the keg is installed in the beverage center, allow 24
hours for beverage to reach recommended temperature.
• If the keg is exposed to ambient temperatures longer than
2 hours, additional cooling time will be required before
beverage will reach recommended temperature.
TYPICAL BEER SERVING EQUIVALENTS
¼ Keg ½ Keg
Ounces 992 1984
Gallons 7 ¾ 15 ½
Cases
(12 oz. bottles)
3
3/8
6 ¾
Weight (full)
82.5 lbs.
(approx.)
165 lbs.
(approx.)