Electrolux BEVERAGE CENTER II, Service Manual

Page: 12 / 77

1 1
FIRST STEPS
This Service Manual provides specific assembly, operating and
maintenance instructions for the Beverage Center. The beverage center
should only be used as instructed in the Use and Care Manual
provided with the product.
Before starting the beverage center,
follow these important first steps.
PARTS
The beverage center comes with a box that contains all the required
parts and accessories. Check to make sure that you have received the
box containing all of the components listed below. You will need the
following tools to assemble the beverage center.
Phillips
TM
Screwdriver
Socket Wrench Adjustable Wrench
Flat Tip
Screwdriver
BEVERAGE DELIVERY KIT BOX
(1) Sump 1 piece
(2) Drip Tray 1 piece
(3) Facade 1 piece
(4) Sump Valve 1 piece
(5) Nut & Rubber Washer (Black) 2 pieces
(1 nut and 2 washers included with sump valve)
(6) Faucet and Shank Assembly 1 piece
(7) Plastic Collar 1 piece
(8) Shank Nut 1 piece
(9) Faucet Knob 1 piece
(10) CO
2
Regulator (with plastic washer) 1 piece
(11) Keg Coupler 1 piece
(12) Clear Hose (Delivery Line) 1 piece
(13) Braided Hose (Gas Line) 1 piece
(14) Worm Clamp (Included with Gas Line Hose) 2 pieces
(15) Rubber Washer (Black) 2 pieces
(Included with Delivery Line Hose)
(16) CO
2
Canister (Empty) 1 piece
NOTE NOTE NOTE NOTE NOTE
The box comes with a “D System” type Keg Coupler (11).
Depending on your choice of beer, you may require a
different Keg Coupler (11). Check with your local beer
distributor to determine which type system you need, and
order additional Key Couplers as needed. For assistance
call Electrolux Consumer Services at 1-800-944-9044
.