33
3. Lift the appliance with a lift truck, remove the pallet and
position the appliance in the place of use;
IMPORTANT
Make sure not to damage the drain when removing
the appliance from the pallet.
4.
Remove the protective film, taking care not to scratch the
surface if scissors or blades are used;
F.2.1
Transport of the appliance
• Keep the device’s barycenter in mind to prevent it from
tipping over.
• If you use the lift truck, keep also in mind the required
spaces and the entrance dimensions.
The minimum entrance dimensions are:
Required
entrance
dimen-
sions
Appliance models
6 GN
1/1
6 GN
2/1
10 GN
1/1
10 GN
2/1
20 GN
1/1
20 GN
2/1
x
mm
850
1046
850
1046
925
1125
inch
33″
15/32
41″ 3/
16
33″
15/32
41″ 3/
16
36″
27/64
44″
27/64
F.2.2
Positioning
For the overall space required and connection dimensions,
refer to the installation diagrams;
NOTE!
The appliance is not suitable for built-in installation.
When positioning the appliance keep in mind the following
minimum distances:
Minimum distances for positioning
normal working
right / left / rear distance 50 mm
work close to
heat source
left side distance 350 to 500 mm
service
conditions
left side distance 500 mm
• All appliance sides must remain at 50 mm from any surface.
If it’s necessary to carry out maintenance works on the
appliance, slide it forwards.
In all models but especially in 20 grids models when possible
leave a space of at least 500 mm between the left side of the
appliance and the other surfaces to enable maintenance
operations.
• The left gap must be a minimum of 350 mm
if heat sources
are acting
on the left side of the appliance.
If it is not possible to keep the left side of the appliance a
sufficient distance away from heat sources, a heat shield
can reduce thermal loads (see accessories catalogue).
50mm/2"
50mm/2"
50mm/2"
50mm/2"
50mm/2"
50mm/2"
500mm/
20"
50mm/2"
50mm/2"
≥ 350mm
14"
Summary of Contents for 10 GN 1/1
