ELECTRO FREEZE Soft Serve Models SLX400, SLX400E, SLX500
184584
31
1.
Place a bucket under the dispense
head. Remove the actuator rod from the
spigot. Leave spigot open. (figure 10-4)
2.
Fill mix hopper with one gallon of mix
and allow mix to push out remaining
sanitizer. When pure mix is flowing from the
dispense head close the dispense handle
(figure 10-4). Reinstall the actuator rod.
Important:
Failure to completely remove sanitizer
or water from the freezing cylinder
before placing in
freeze will
damage the freezer.
3.
Press the
freeze button to start
the freezer..
4.
Repeat Steps 1 - 3 for the other side of
the freezer.
5.
Sanitize and install nozzles.
10.2.2
Priming Instructions for Freezers Built into a Wall
Figure 10-5 “OPEN” — position
Figure 10-6 “CLOSED” — position
“CLOSED”-
FILL
WITH MIX
“OPEN”
READY TO SERVE
