Electra ONG 25 DCI INV, Service Manual

Page: 61 / 80

I N S T A L L A T I O N I N S T R U C T I O N S
FO R DCI SPLIT WA LL MO U NT ED A IR CO NDIT IO NER
Shape Name Qty Used for
Remote control
with batteries
Remote control
bracket
Screws
washer dowels
Screws dowels
Outdoor unit
drain connector
Mounting pads
Cable ties
Cable terminals
1
1
4
2
1
4
4
1
Mounting plate 1 Wall mounting
of the indoor
unit
Operation of
unit
Wall mounting
of the remote
control
Wall mounting
of indoor unit
Wall mounting
of remote
control bracket
Outdoor unit
water drain
Padding of
outdoor unit
bottom support
Securing wires
in the indoor and
outdoor unit
Securing of
grounding wire
in the indoor
and outdoor unit
Air purifying
filter
(Optional)
2 Cleaning the air
Remote control
operation
Unit operation
Installation manual
3 Users and
installers
reference
2 1
LOCATION OF INDOOR AND
OUTDOOR UNIT
Select the location considering the following:
INDOOR UNIT
OUTDOOR UNIT
1. Choose a location which will provide good air
circulation.
2. Do not install the unit near a heat source or where it will
be exposed to direct sunlight.
3. T he location must allow convenient electrical wiring.
drainage and tubing connections .
4.T he appliance must be positioned so that the plug is
accessible.
5 Installation site should provide an easy passage to
outdoors.
6. T he unit must be mounted on a strong wall that will
withstand the generated vibrations.
7. Install the mounting plate as shown in .
1. T he location must allow easy servicing and provide
good air circulation .
2. T he unit may be suspended from a wall by a bracket
(O ptional) or located in a free standing position on the
floor (preferably slightly elevated).
3. If the unit is suspended, ensure that the bracket is
firmly connected and the wall is strong enough to
withstand vibrations.
4. U nit location should not disturb neighbors with noise or
exhaust air stream.
5. Place the mounting pads under the unit legs.
6. Refer to figure 5 for allowed installation distances.
7. When the unit is installed on a wall, install the drain
connector hose and drain plug as shown in .
as shown in fig 3
fig 5
8. Install the remote control bracket as shown in fig 4.
as shown in fig 5
fig 1 and fig 2
Fig.1
1.Bottom of outdoor unit
2.Drain connector Fig.2
Drain installation
Example
Fig 2
Fig 1
1
2
ACCESSORIES SUPPLIED WITH
THE AIR CONDITIONER
Indoor Unit's Accessories Only for One Unit.
Power input
cable 1 Connecting indoor
unit power
(Optional)