ELCOM TDC-5000, User Manual

Page: 19 / 25

Rotating the image by 180°
If the device is installed with a type of assembly on which the monitor is rotated by 180° it is also essential
to set the monitor.
For setting the rotation of the displayed image press the panel on the desktop surface and hold until a menu
appears (mouse right-click). Then select: Graphics Properties. A window opens with settings for the charac-
teristics of the display on the monitor, where you select the Display settings and set the Rotation. Confirm by
pressing OK, or Apply.
Figure 3.7. Rotating the image by 180°
Connecting and disconnecting a USB device
When connecting any equipment to the TDC-5000 PC observe the manufacturer’s instructions for the given
device. After connection of a USB device to a TDC-5000 PC port, the operating system detects it and if it
has a driver available for the device, it will install the driver and the device can then be used. If a driver is
not automatically available, it is necessary to search for one and install it. Drivers are usually located on the
CD supplied with the device for which they are designated or can be downloaded from the Web site of the
manufacturer.
If after connecting and using a USB device you want to disconnect, it is a good idea to remove it safely – first
in the operation system (in order that all device operations be completed) and then after notification of the
operation system to physically pull out the relevant connector. The procedure for safe removal of a device
depends on the operating system used. Connecting and disconnecting USB devices when the TDC-5000
PC is switched off is always safe.
Note: Not all equipment allows for safe removal of hardware. Safe removal makes sense mainly with
equipment which stores data (hard disks, USB memory sticks) and which also use the write buffer.
Equipment which is not shown on the list of equipment that can be safely removed can be discon
-
nected without the procedure for safe removal.
44
Operating the device
ENGLISH