ELCOM TDC-5000, User Manual

Page: 10 / 25

Device characteristics
Table 2.1. Meaning of LED indicator
not lit the device is switched off
green the device is switched on in normal mode or in sleep mode
Table 2.2. Function of buttons on the side of the device
Buttons for controlling the device
POWER switch on/switch off
RESET
forced emergency restart of the device (use only if the operating system stops
responding and it is not possible to perform a standard switch off/restart)
Attaching peripheral devices
Figure 2.2. Connectors on the TDC-5000 PC
Power connector
USB connectors
External VGA
display connector
RS-232
connector
RJ-45
network connector
It is possible to connect accessories and different peripheral devices to the TDC-5000 PC. These can be
connected directly to the TDC-5000 PC or through port replicator which allow for the discrete placement of
cables. The choice of a replicator depends only on your needs and requirements. You can find more informa-
tion about replicator ports on offer at our Web site at www.elcom.eu. Connectors for connecting peripheral
devices are located on the back cover.
35
Device characteristics
ENGLISH