Program manual
Euro-2500T
© Elcom Ltd.
24
1. sys. flag
001112
Display:
Flag No. 1 programming.
Flags programming procedure:
3.3.2 System flags correction
1.To be able to change the setting of any of the system flags, first set the cash register to
P mode by pressing button 4 and button Mode.
2.Enter the flag number to be edited and press the
(RA) button.
3.Enter the flag value and press the
(SUBTOTAL) button.
4.Print the newly programmed settings by pressing the
(CHECK) button.
5.Finish the programming by pressing the
(TOTAL) button.
System flags correction procedure:
3.3.3 Printing flags values
In the programming mode, select flags programming by pressing the
button. After pressing the
(CHECK) button, flags values will be printed. It is possible to print the value of the particular flag by
pressing the
(RECEIPT) button.
02.
Flag
parameters
Next flags
Skip flag
...
123
Flag
From flag No.1
...
Number
Continue in flags
programming
