© Elcom Ltd.
Euro-2500T
Program manual
47
Afterwards the information on conversion for the second stage of
Euro
currency is displayed. The same
information is also printed out.
During the second stage the current EUR rate can be set in the programming mode in the following way:
current rate
Note 1:
All grandtotals will be deleted by moving into the second stage.
Note 2:
The conversion into the second stage is possible only after daily and periodical reports have been
executed. The return to the first stage is not possible without an ECR master reset. For this, it is
necessary to call your service technician.
3.12.4 3rd stage of
Euro
currency
The basic currency is
Euro
, the supplementary currency is any foreign.
The customer can pay either in
Euro
or in any foreign currency.
Programming the third stage of
Euro
currency.
Set the cash register to P mode by pressing button 4 and button Mode and press the following keytops:
2
0
0
3
currency name EUR rate currency flag
Currency name:
the abbreviation of a supplementary currency, max. 3 characters
EUR rate
:
the actual
Euro
currency rate to the national currency (entered to max. 11 digits).
max rate is 10 000
min. rate is 0,0001.
Currency flag:
1st digit - the number of decimal places to which the amount of supplementary
currency is displayed
2nd digit - the number of decimal places to which the amount of supplementary
currency is rounded
Afterwards the information on conversion for the third stage of
Euro
currency is displayed. The same
information is also printed out.
During the third stage the supplementary currency rate can be set in the programming mode in the following
way:
currency name EUR rate currency flag
Note:
A return to the stage without
Euro
currency is not possible without ECR master reset. For this, it is
necessary to call your service technician.
$
$
