© Elcom Ltd.
Euro-2500T
Program manual
37
3.9.3 Programming of department name
After finishing flag programming, the number of the department is in the first line and the second line is
reserved for name programming. (foods, soft drinks, tobacco etc.). The name of the department can
consist of up to 14 characters of standard height or 7 characters of double height.
Enter hexadecimal character codes, which you can find in the alphabetic and hexadecimal character table
and press the
button. After pressing the button, you can continue to program additional depart-
ments. Check set values by pressing the
button for printing them in the mode of department
programming. If you make a mistake during the programming, correct the previous characters by pressing
(CLEAR) key. Finish department programming by pressing the
button.
1.DPT NAME
FOODS
Display:
The first department name programming
3.9.4 Correction of program for departments
To correct the set department values just set the cash register to P mode by pressing button 4 and button
Mode. Press the selected department button and start the programming of the departments (chapter 3.8.1.).
3.9.5 Printing of the department values
Check department programmed values by pressing the
button in the department programming mode.
If in other than the programming mode, press the button of one of the departments and then the
button.
Programmed DPT
1. DPT
PRICE: 12.30
NAME:
DPT1
FLAG 10038
2. DPT
PRICE: 85.00
NAME:
Alcohol
FLAG 20038
. . . .
