10/2016 - Art. Nr. 4200 1016 3901A
37
en
Servicing
Maintenance frequency indicator
After a certain period of operation, the
following information may be displayed:
This means that
maintenance
must
be carried out by a
specialist.
If the fitter has
registered his
telephone number
,
then this appears,
as well as the
number of the
completed service
contract
(accessible
via the fault menu)
To change the telephone number
• Call up the fault menu by pressing
BP1
,
then keep pressing the button to scroll
through
BP1
until the desired pictogram
is displayed.
• Press
BP2
to enter a change in the
pictogram: the first figure flashes.
• Select the value (from 0 to 9) by
repeatedly pressing
BP1
.
• Confirm by pressing
BP2
.
• Repeat the operation until you reach the
last figure.
After confirming the last figure, the
complete pictogram is displayed for 5
seconds, then the control unit returns to
the operating screen.
To change the contract number
• Call up the fault menu by pressing
BP1
,
then keep pressing the button to scroll
through until the desired pictogram
«contract number» is displayed.
• Press
BP2
to enter a change in the
pictogram: the first figure flashes.
• Select the value (from 0 to 9) by
repeatedly pressing
BP1
.
• Confirm by pressing
BP2
.
• Repeat the operation until you reach the
last figure.
After confirming the last figure, the
complete pictogram is displayed for 5
seconds, then the control unit returns to
the operating screen.
A4
Display
BP1
push-button 1
Request: fault code
BP2
push-button 2
Request: values
