54
First time startup a boiler
When a boiler is activated there is a
question as in the picture on the left.
After pressing
OK
the next menu is
shown.
Single boiler setting
When there is no cascade, select
“Single boiler”.
The system will
automatically load all needed
parameters for a single boiler; if it
is a double engine the engine will
automatically set.
Cascade Setting
If the boiler is part of a cascade
installation, select
“Master
cascade“
and confirm the selection by
pressing the
OK
button. You will then
be prompted to configure the appliance
as either a master or slave unit and
configure the address.
Single Boiler
Slave boiler 2
Slave boiler 1
Master cascade
Unconfigured (actual)
Available configurations
Slave boiler 1
Slave boiler 4
Slave boiler 3
Slave boiler 2
Unconfigured (actual)
Available configurations
It’s needed to configure the device, press OK to
proceed
Slave boiler 4
Slave boiler 7
Slave boiler 6
Slave boiler 5
Slave boiler 3
Available configurations
Boiler setting
