ELBUR: PB 521 II, PB 526 II
Elbur sp. z o.o. sp.k.
19 of 36
6.5. Assembly of drive unit attached to control
box
–
adjustment of back rest section
•
drive unit with a control box is fixed under mattress
support platform with the motor housing towards
the foot end board (label on the bed);
•
align holes in holders and the drive,
•
insert the quick-release bolt and secure by closing
the retainer,
•
align holes in the second holder and the drive on
the other its end,
•
insert the quick-release bolt and secure by closing
the retainer.
6.6. Assembly of drive unit
–
adjustment of leg rest section
•
drive unit is fixed under mattress support
platform with the motor housing towards the
head end board (label on the bed);
•
align holes in holders and the drive,
•
insert the quick-release bolt and secure by closing
the retainer,
•
align holes in the second holder and the drive on
the other its end,
•
insert the quick-release bolt and secure by closing
the retainer.
6.7. Connecting electric components
Warning
Risk of short-circuit and fire
–
always check are cables in the correct
position, jamming or kinking of the cable must be avoided.
Plug the electrical component’s plug
s into the sockets as shown (plug
arrangement from right to left):
•
HB
–
hand switch,
•
4
–
the scissor lift drive unit,
•
3
–
unused connection slot (use blind stopper),
•
2
–
leg rest drive unit,
•
1
–
back rest section drive unit.
