ELBUR: PB 521 II, PB 526 II
Elbur sp. z o.o. sp.k.
15 of 36
4.0. Electric components
Warnings
Nursing beds do not have emergency-off switch. Remove the power plug
in emergency situation.
Take special care in assigning the drive units for adjustments of mattress
support platform. These must not be interchanged. Otherwise it can
caused damage of electric components.
4.1. The scissor lift drive unit
Drive unit is mounted on scissor lift. It is used to adjust height of mattress
support platform (up and down). User or operator do not have to assembly
this drive unit because it is done by manufacturer.
4.2. Back rest / foot rest drive units
Nursing beds described in this instruction manual
have one drive unit used to adjust back rest section
and one drive unit used to adjust upper and lower leg
sections. Both of them are fitted under the bed -
in that case assembly is necessary
–
see subclauses
6.4-6.6.
✓
Assembly components for PB
526 II:
- 4x bevel for assembly front
boards,
- 6x quick-release bolt,
- 2x castor for assembly
mattress support platform
on the scissor lift,
- 4x slider to assembly side
rails,
- 1x allen key,
- 4x grub screw,
- 6x knurled screw,
- 8x screw for assembly
bevel to end board.
✓
Assembly components
for PB 521 II:
- 6x quick-release bolt,,
- 2x castor for assembly
mattress suport platform
on the scissor lift,
- 1x allen key,
- 2x knurled screw,
- 8x wood screw.
