11
10
Main Menu
Sub Menu 1
Sub Menu 2
Sub Menu 3
Comments
Note
System Setting
Date and Time
YYYY-MM-DD TIME
(e.g. 2014-06-20 14H30)
System Setting
Date Format
System Setting
Entry Exit Delay
Entry Delay
000-300
This function can be used if you do not want to bring a remote con-
trol or RFID tag with you. When the system is armed, you hear one
beep every second to remind you to leave. The beep rhythm speeds
up during the last 10 seconds. If an intruder is detected, the alarm
will be delayed accordingly.
Time is calculated in seconds. The Entry and Exit Delay can be set
from 0 to 300 seconds.
The entry and exit delays only work
for sensors connected as Delay Zone
accessories (see "Wireless" on page 8).
The Entry Delay gives you time to disarm
the system on the control panel without
triggering an alarm.
The Exit Delay gives you time to arm the
system on the control panel and leave your
home without triggering an alarm.
Exit Delay
000-300
System Setting
Auto Arm / Disarm
Auto Arm Time
<00:00>
You can set up the system to arm and disarm automatically at a
defined time every day.
Setting Auto Arm and Auto Disarm to
the exact same time will deactivate the
function.
Auto Disarm Time
<00:00>
ON or OFF?
System Setting
Control by Phone
ON or OFF?
-
You can activate or deactivate the control of your system by phone
call. Activating the control by phone call enables you to arm and
disarm the system and monitor your home by phone call.
See instructions on page 14 for more
information on the control of the system
by phone call.
System Setting
GSM Fail Alarm
ON or OFF?
Notification of SIM/ GSM signal problem.
Deactivate this function if you want to
use the alarm system in PSTN mode only.
System Setting
Keypad tones
ON or OFF?
-
Activate or deactivate the sound when typing on the keyboard of the
control panel.
System Setting
Access code
Admin Code
123456
Your admin code enables you to enter the setup menu.
Default admin code: 123456
It is recommended to change all codes
before using your system for the first
time and to keep your codes secret
User Code
1234
Your user code enables you to disarm the system on the control
panel. The user code is the access code requested when you call the
control panel.
Default user code: 1234
Duress Code
1111
In case of emergency, when you are requested to disarm the system
by force, it is recommended to disarm your system with your Duress
Code. The panel will silently dial the stored phone numbers.
Default duress code: 1111
Open Door Code
8888
You can open electronic doors using this code. The door must be
wired to the [LOCK] interface on the back of the control panel.
