ELBO CONTROLLI SETHY SIX, Installation, Operation And Maintenance Manual, Page: 86 / 96

15 RAPID LABEL PRINTING ELBO CONTROLLI srl
SETHY SIX
15 RAPID LABEL PRINTING
As previously shown, you can print a tool label from the main window, at the same time as it is being
measured or by manually entering or automatically acquiring the corresponding radius values (or
diameter values), length, angle and radius via the 212V system vision.
ckk0013
As previously mentioned, data (considered necessary) can be manually entered or, by switching to
camera mode, calculated through geometric functions as described in chapter 11.2 regarding tool set
entering.
When launching the printing labeling machine does not respond to the command will be displayed on the
screen the following message:
Page 86 of 96
Figure 38: Rapid label printing
Corrector number
Tool code
Radius or diameter
Length
Rake
Radius
Clean data
Print