ELBO CONTROLLI SETHY SIX, Installation, Operation And Maintenance Manual, Page: 78 / 96

11 TOOL SETS ELBO CONTROLLI srl
SETHY SIX
The values calculated for the intersection point can be saved as X and/or Z dimension of the tool pressing
the “save value” keys.
You will be asked if you want to acquire the position on the axis or the value calculated for the
intersection (IMAGE).
R adius insert It represents the radius of the framed cutting-edge and it can be manually entered
by pressing the corresponding field, then digitalizing the value using the
alphanumeric keyboard or acquired through the automatic radius measurement
(Para. 9.7.2) or manual radius measurement (Para. 9.7.5).
Also in this case, you can save the coordinates of the center of the circle as X and/or Z dimension of the
tool by pressing the “save value” key.
You will be asked if you want to acquire the position of the axis or the CZ/CZ calculated value. (IMAGE)
Page 78 of 96
Press to manually
enter radius
Press to capture
radius value