ELBO CONTROLLI SETHY SIX, Installation, Operation And Maintenance Manual, Page: 58 / 96

9 212V VISION SYSTEM ELBO CONTROLLI srl
SETHY SIX
9.8.6 Manual radii acquisition
This function is only active in fixed grid mode, it allows you to manually calculate the
value of a radius on the framed profile detecting five points on the centre of the grid and to
acquire it for the tool table or rapid printing of a label.
The operator has to make the shown image as clear as possible in order to measure it:
focusing, cleaning from dust and chips and correct framing
As shown in the following pictures, after the function is activated bring five points of the circle in
collimation with the center of the fixed grid, to measure the radius of the circle and detect its values.
Page 58 of 96
Point 1
collimation
Point 2
collimation
Press to
capture
point 1
Press to
capture
point 2
Point 3
collimation
Press to
capture
point 3
Point 4
collimation
Press to
capture
point 4