ELBO CONTROLLI SETHY SIX, Installation, Operation And Maintenance Manual, Page: 79 / 96

11 TOOL SETS ELBO CONTROLLI srl
SETHY SIX
When all the desired data has been entered (only the calibrator number is essential), press
the confirm key to add the tool to the list.
Pressing the table header you can sort in ascending order the appropriate column.
11.2.1 New tool entering
Press the “enter tool” to add a new tool to the set, remember you can’t use a calibrator
number twice. Enter data following instructions of Para. 11.2
11.2.2 Tool deleting
Press “delete tool” to delete a tool from the set.
Confirm to delete.
11.2.3 Tool label printing
If you have a labelling machine connected to the Presetter (see chapter 13), press this key
to print a label containing all data regarding the measured tool, as shown in the following
example.
Page 79 of 96