ELBO CONTROLLI SETHY SIX, Installation, Operation And Maintenance Manual, Page: 59 / 96

9 212V VISION SYSTEM ELBO CONTROLLI srl
SETHY SIX
Press this key to acquire the radius value detected for the tools’ table or to rapidly print a
label.
Press this key again to repeat the procedure.
Press this key to close the measurement function.
9.8.7 Radii and angles checking with mobile grid
When you only need a simple comparison to check angles and radii, you can visualize, along with the
fixed grid, an angular grid indicating the degrees or a circular grid indicating the radius.
Both functions will not be activated in autocollimation mode.
In the case of an angular grid, collimate the axes of this grid with the tool’s profile to see
the inclination of a line (eg. Rakes, tools dislodgments, etc.).
Rotate using the cursor or by manually inserting the angle value to set with a maximum
precision of 1 centesimal degree on the numeric keyboard. Touch the value window to
display the keyboard.
Page 59 of 96
Point 5
collimation
Press to
capture
point 5
Calculated
radius value