27
4 - ADJUSTMENT OF THE MINIMUN
OF THE TOP BURNERS
Considering that in the minimum position
the flame must have a length of about 4
mm and must remain lit even with a
brusque passage from the maximum
position to that of minimum.
The flame adjustment is done in the fol-
lowing way:
– Turn on the burner
– Tum the tap to the MINIMUM position
– Take off the knob
– With a small flat screwdriver turn the
screw inside the tap rod to the correct
regulation (fig. 11.7).
In the taps with safety valves tur the
screw F (fig. 11.8).
Normally for G30/G31 gas, tighten up
the regulation screw.
Fig. 11.7
Fig. 11.8
F
Summary of Contents for EC 530
Page 35: ...35 Identification label...
