24
These operations must be carefully ful-
filled as follows.
1 - GAS CONNECTION
– Connect the cooker to the gas mains
utilizing rigid or flexible pipes.
– The connection must be executed to
the rear of appliance (fig. 11.1); the
pipe do not cross the cooker.
– The unused end inlet pipe of the cook-
er (left or right) must be closed with
the plug interposing the gasket.
L.P.G.
(
G
30/G31)
– If not mounted, fit up the holder “R” to
the holder “M” interposing gasket “Q”.
– Connect the cooker to the cylinder
pressure regulator by a suitable rubber
tube (inside diameter 8 mm).
Natural gas
(
G
20) or Town Gas (G110)
– Remove the holder “R”.
– Connect the cooker to the gas net by
a suitable rubber tube (inside diameter
13 mm).
The rubber tube must be as short as
possible, without contractions or
kinks.
IMPORTANT:
After connecting to the mains, check
that the couplings are correctly
sealed, using soapy solution, but
never a naked flame.
Gas connection for:
The fitting (fig. 11.2) is made up of:
– 1 adapter “M” for Natural Gas (G20)
or Town Gas (G110)
D
M
Q
R
Fig. 11.2
– 1 adapter “R” for L.P.G. (G30/G31)
– gasket “D” and “Q”
Summary of Contents for EC 530
Page 35: ...35 Identification label...
